50 Belver Avenue, North Kingstown, RI, 02852 Construction Projects

Property Page

Quick Links

Overview

BLDUP Latest Activity

Location Data

Recent Activity

50 Belver Avenue Overview

Address: 50 Belver Avenue

Permitted Construction:

Contacts (Sign up for PRO to see this --> property's <-- 44 contacts)

Related Documents (93)

38392

A permit for the amount of $0.00 was issued on 09/09/21 to Ownership.

Permit Details: assist ARDEN to install cable into switchgear Provide and install terminations for 750 KCMIL 5 KV CLX cable at substation and Electric room 14 Main Sail DR

This is a no charge permit our fee is carried in ARDENS permit

36608

A permit for the amount of was issued on 03/17/21 to Ownership.

36577

A permit for the amount of $50,000.00 was issued on 03/12/21 to Ownership.

Permit Details: As directed by the Owners Representative Bonfanti, Arden Electricians will install process & power wiring and cable tray on the Bonfanti Roll Conveyor equipment. Pull wire, terminate and assist in testing I/O wiring with Bonfanti Representatives.
This scope of work to include all labor & material is in addition to the original A/Z scope and not covered under their permit.

36566

A permit for the amount of $0.00 was issued on 03/11/21 to Ownership.

36239

A permit for the amount of $0.00 was issued on 01/26/21 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process equipment wiring, terminate and assist in testing I/O wiring for the Coextrusion equipment between column lines 1 and 4 on level one only. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

36159

A permit for the amount of $40,000.00 was issued on 01/14/21 to Ownership.

Permit Details: Assist with some wire pulls and terminations on the A6 expansion

36035

A permit for the amount of $407,846.00 was issued on 12/23/20 to Ownership.

Permit Details: Installation of Hot Oil Heater

35975

A permit for the amount of $350,000.00 was issued on 12/16/20 to Ownership.

Permit Details: Install Ductwork per contract/coordination drawings

35711

A permit for the amount of $20,000.00 was issued on 11/11/20 to Ownership.

Permit Details: Installing cable tray, and pulling and terminating rotary feeders and blowers

35687

A permit for the amount of $107,215.00 was issued on 11/09/20 to Ownership.

Permit Details: Install and connect MCC & 480/120V Power center furnished with Air Products equipment. Pull and terminate all power, control and instrumentation cabling for new Air Products Nitrogen Skid, compressor and tanks. Furnish and install (3) new site light fixtures. Furnish and install heat trace on (2) condensate lines and assist Air products with commissioning. MCC feeders, all associated underground conduits and grounding required for this equipment was previously installed under Arden Electrical Permit #34638.

35631

A permit for the amount of $0.00 was issued on 10/30/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner Erema Regranulation equipment, pull wire, terminate and assist in testing I/O wiring for the Erema Regranulation equipment between column lines 32 and 37. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35628

A permit for the amount of $0.00 was issued on 10/29/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner 290 Die equipment, pull wire, terminate and assist in testing I/O wiring for the 290 Die equipment between column lines 2 and 5. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35627

A permit for the amount of $0.00 was issued on 10/29/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner 320 Casting/Water Removal Blower equipment, pull wire, terminate and assist in testing I/O wiring for the 320 Casting/Water Removal Blower equipment between column lines 2 and 5. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35625

A permit for the amount of $0.00 was issued on 10/29/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner Flake Silo equipment, pull wire, terminate and assist in testing I/O wiring for the 251-2 Flake Silo equipment between column lines 29 and 32. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35623

A permit for the amount of $0.00 was issued on 10/29/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner Auxiliary Winder machine, pull wire, terminate and assist in testing I/O wiring for the 336 Aux Winder equipment between column lines 8 and 9. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35622

A permit for the amount of $0.00 was issued on 10/29/20 to Ownership.

Permit Details: As directed by the Owners Representative Bruckner, Arden Electricians will install process electrical cable tray on the Bruckner Dust Filter machine, pull wire, terminate and assist in testing I/O wiring for the A6 214-2 Dust Filter equipment between column lines 3 and 5. As discussed, this scope of work to include all labor & material was included in the original A/Z scope & Permit #33855.

35571

A permit for the amount of $31,000.00 was issued on 10/23/20 to Ownership.

Permit Details: As Directed by Owners Representative Kampf, Arden Electricians will install all cable tray, wire, shipping split conduits & terminations for the Slitter machine load side of machine Line connections, this is equipment control wiring to control panel which spans from CL 39 to 42. And will be supporting IO testing with equipment manufacture As discussed, this scope of work to include all labor and material was included in A/Z PERMIT #33855. along with there drawings.

35281

A permit for the amount of $200,000.00 was issued on 09/25/20 to Ownership.

Permit Details: As Directed by Owners Representative Bruckner, Arden Electricians will install all cable tray, wire, shipping split conduits & terminations for the (TDO) transverse direction orientor machine which spans from CL 10 to 29. As discussed, this scope of work to include all labor and material was included in A/Z PERMIT #33855.

35272

A permit for the amount of $197,556.00 was issued on 09/24/20 to Ownership.

35130

A permit for the amount of $596,454.00 was issued on 09/10/20 to Ownership.

Permit Details: Rayco Arden is performing a direct replacement of the distribution board and feeder cables. The only new thing Rayco arden is installing is a new cable tray system and new 750 KCMIL tryplex CLX MV cable of which we be making 18 MV terminations, We will disconnect and remove the existing 480V Distribution board and replace with a Owner furnished Distribution board which is an exact replacement with updated breakers.
The existing load shed terminal cabinet will be relocated to an adjacent wall to facilitate the removal and reinstallation of the new dist section.

34995

A permit for the amount of $2,550.00 was issued on 08/25/20 to Ownership.

Permit Details: Provide temporary power feed for trailer to be used for COVID screening

34705

A permit for the amount of $10,000.00 was issued on 07/23/20 to Ownership.

34638

A permit for the amount of $126,900.00 was issued on 07/15/20 to Ownership.

Permit Details: Provide all underground Conduit, grounding and pad lighting for future Air Gas N2 skid. Install Owner furnished 2000A NEMA 3R switchboard section. Reconnect existing skid and furnish and install cable tray for cabling for future skid to be connected by others.

34604

A permit for the amount of $62,080.00 was issued on 07/13/20 to Ownership.

Permit Details: Rigging, terminating and testing of 5KV cables for Building A6 Switchgear upgrade in conjunction with Wayne J Griffin Electric work along with Permit #33227

33956

A permit for the amount of $1,380,000.00 was issued on 04/28/20 to Ownership.

Permit Details: Installation of Process/Pneumatic Piping. Piping only.

33939

A permit for the amount of $2,550.00 was issued on 04/22/20 to Ownership.

Permit Details: Provide temporary power feed for trailer to be used for COVID screening

33797

A permit for the amount of $5,000.00 was issued on 04/08/20 to Ownership.

33478

A permit for the amount of $0.00 was issued on 03/04/20 to Ownership.

33451

A permit for the amount of $295,000.00 was issued on 03/02/20 to Ownership.

Permit Details: Providing all conduit and wire and final device installation necessary to complete the control work on this project.

33415

A permit for the amount of $5,049,644.00 was issued on 02/27/20 to Ownership.

Permit Details: Installation of piping utilities only for addition, Chilled Water, Natural Gas, Nitrogen, Purified Water, Plant Air.

33251

A permit for the amount of $17,000.00 was issued on 02/13/20 to Ownership.

Permit Details: Install an additional 150 KVA Transformer and 500A 3R Panel connected to existing Temporary Trailer service in order to feed additional future Trailers. Currently the only additional Trailer to be connected has been installed under Building Permit # 32702

33240

A permit for the amount of $1,300.00 was issued on 02/12/20 to Ownership.

Permit Details: Temporary connection to temp office trailer

33227

A permit for the amount of $365,169.00 was issued on 02/12/20 to Ownership.

Permit Details: A6 Building Switch Gear Upgrade, The installation of medium voltage switch gear and feeders.

33110

A permit for the amount of $7,500.00 was issued on 02/04/20 to Ownership.

32760

A permit for the amount of $2,500.00 was issued on 12/31/19 to Ownership.

Permit Details: Install temporary wiring for 3 rolling steel doors.

32702

A permit for the amount of $7,500.00 was issued on 12/17/19 to Ownership.

32694

A permit for the amount of $10,960.00 was issued on 12/17/19 to Ownership.

32535

A permit for the amount of $950.00 was issued on 11/22/19 to Ownership.

32524

A permit for the amount of was issued on 11/22/19 to Ownership.

32483

A permit for the amount of $500.00 was issued on 11/18/19 to Ownership.

Permit Details: Connect office trailer

32472

A permit for the amount of $416,649.00 was issued on 11/15/19 to Ownership.

Permit Details: Rig/Set AHU's, GUH's (purchased by GC), install gas service to units.

32396

A permit for the amount of $590,000.00 was issued on 11/07/19 to Ownership.

Permit Details: Install fire protection systems through out new production facility.

32105

A permit for the amount of $187,500.00 was issued on 10/11/19 to Ownership.

Permit Details: Underground Utilities, Water to equipment, Eyewash Stations, Water Heater and associated components.

31868

A permit for the amount of $2,749,000.00 was issued on 09/23/19 to Ownership.

Permit Details: Installation of temporary power and lighting, conduit, wire, switchgear, lighting, fire alarm, lightning protection, cable tray, devices and equipment connections, etc. to support the expansion of the Toray Plastics America project.

30930

A permit for the amount of $0.00 was issued on 07/08/19 to Ownership.

30422

A permit for the amount of $3,865.00 was issued on 05/23/19 to Ownership.

Permit Details: Replacing existing terminations with 200 amp elbows on existing cable

30321

A permit for the amount of $15,000.00 was issued on 05/13/19 to Ownership.

Permit Details: REPLACE EXISTING PAD MOUNT TRANSFORMER AT SWITCH-YARD. REWORK LOAD SIDE CONDUCTORS AND INSTALL NEW OUTDOOR ENCLOSED BREAKER. TRANSFORMER POWERS MAIN OFFICE.

30246

A permit for the amount of $161,248.00 was issued on 05/07/19 to Ownership.

Permit Details: Underground Duck Bank & Grounding of Foundation for future building by others.

30245

A permit for the amount of $22,500.00 was issued on 05/07/19 to Ownership.

Permit Details: Install GC furnished Temporary Service Equipment to supply temporary power to the Temporary trailer compound and temp Guard shack.

30141

A permit for the amount of $8,438,144.00 was issued on 04/30/19 to Ownership.

29662

A permit for the amount of $103,671.00 was issued on 03/20/19 to Ownership.

29609

A permit for the amount of was issued on 03/13/19 to Ownership.

29494

A permit for the amount of $100.00 was issued on 03/02/19 to Ownership.

29392

A permit for the amount of $20,000.00 was issued on 02/20/19 to Ownership.

Permit Details: Install 10 Ton Split System

29296

A permit for the amount of $3,200,000.00 was issued on 02/08/19 to Ownership.

29183

A permit for the amount of $3,500.00 was issued on 01/29/19 to Ownership.

Permit Details: WIRE NEW 10 TON HVAC SPLIT SYSTEM

21173

A permit for the amount of was issued on 11/28/17 to Ownership.

5661

A permit for the amount of was issued on 02/09/15 to Ownership.

4917

A permit for the amount of was issued on 04/29/14 to Ownership.

4876

A permit for the amount of was issued on 04/23/14 to Ownership.

4877

A permit for the amount of was issued on 04/23/14 to Ownership.

4875

A permit for the amount of was issued on 04/23/14 to Ownership.

4833

A permit for the amount of was issued on 04/16/14 to Ownership.

4834

A permit for the amount of was issued on 04/16/14 to Ownership.

4769

A permit for the amount of was issued on 04/02/14 to Ownership.

4768

A permit for the amount of was issued on 04/02/14 to Ownership.

4732

A permit for the amount of was issued on 03/24/14 to Ownership.

4733

A permit for the amount of was issued on 03/24/14 to Ownership.

4731

A permit for the amount of was issued on 03/24/14 to Ownership.

4706