1198 Bellaire Drive Northeast Overview
Address:
1198 Bellaire Drive Northeast
Contacts (Sign up for PRO to see this --> property's <-- 6 contacts)
BLDUP Latest Activity
A permit for the amount of was issued on 04/25/24 to Ownership.
Permit Details: 1198 Bellaire Drive 1198 Bellaire Drive System placement- 3 Ton Upstairs Bedrooms Right Side Attic, 4 Ton Zone (1) Guest Suite, (2) Bunk Left Area Goes in Left Side Attic, 5 Ton Main in Basement Mech Room Under the Kitchen Zone System- Yes Dampers- 2-14" Bypass- 1-12" Lineset- 1-75'x3/4"", 2-75'x7/8" B-vent- No *(3) Concentric Vents Waterheater- No *Tankless Floor boots- Yes 14" Flex- Yes Venthood- Yes 10" (20' to the sidewall) with 8" Makeup Air Bath fans- 7-4" *Metal Plenums (Bubble Wrap) *Need CONCRETE blocks under both furnaces for better drain slope *Run drains to the hubs in the basement *Need (5) Media Filters (Both 4 and 5 Ton Needs 2) *Need to run 6" Supply and 6" Return in the attic (Off both systems) *Leave tyton for bath fans *All bath fan flex to hard pipe must have tyton outside of tape *CANNOT RUN MORE THAN 14' FOR 4' FLEX FOR THE BATH FANS *Seal ALL seams on dryer with silver tape *Screw, tape and mastic ALL venthood connections *Need (5) 14x8x10 boots (4- Floor and 1- Ceiling) System placement- 4 Ton Zone (1) Master/Study, (2) Exercise/Bsmt Goes in the Basement Mech Room on the Front Right, 2 Ton Basement Bedrooms Goes in the Basement Mech Room on the Front Left, 2 Ton Basement Sitting/Game/Billards Goes in the Basement Mech Room on the Front Left Zone System- Yes Dampers- 3-12" Bypass- 1-12" Lineset- 1-30'x3/4", 1-75'x3/4"", 1-50'x7/8" B-vent- No *(2) Concentric Vents Waterheater- No *Tankless Floor boots- Yes 14" Flex- Yes Venthood- No Bath fans- 7-4" *Metal Plenums (Bubble Wrap) *Need CONCRETE blocks under both furnaces for better drain slope *Run drains to the hubs in the basement *Need (4) Media Filters (4 Ton Needs 2) *Leave tyton for bath fans *All bath fan flex to hard pipe must have tyton outside of tape *CANNOT RUN MORE THAN 14' FOR 4' FLEX FOR THE BATH FANS *Seal ALL seams on dryer with silver tape *Screw, tape and mastic ALL venthood connections *Need (3) 14x8x10 boots (1- Floor and 2- Ceiling) *Need Aprilaire 100 Pint Dehumidifier for the basement system *Need concrete blocks and drain pan for the dehumidifier *Run 10" Return for dehumidifier to mark in basement and 10" supply to the air handler return plenum
Permit Details: 1198 Bellaire Drive 1198 Bellaire Drive System placement- 3 Ton Upstairs Bedrooms Right Side Attic, 4 Ton Zone (1) Guest Suite, (2) Bunk Left Area Goes in Left Side Attic, 5 Ton Main in Basement Mech Room Under the Kitchen Zone System- Yes Dampers- 2-14" Bypass- 1-12" Lineset- 1-75'x3/4"", 2-75'x7/8" B-vent- No *(3) Concentric Vents Waterheater- No *Tankless Floor boots- Yes 14" Flex- Yes Venthood- Yes 10" (20' to the sidewall) with 8" Makeup Air Bath fans- 7-4" *Metal Plenums (Bubble Wrap) *Need CONCRETE blocks under both furnaces for better drain slope *Run drains to the hubs in the basement *Need (5) Media Filters (Both 4 and 5 Ton Needs 2) *Need to run 6" Supply and 6" Return in the attic (Off both systems) *Leave tyton for bath fans *All bath fan flex to hard pipe must have tyton outside of tape *CANNOT RUN MORE THAN 14' FOR 4' FLEX FOR THE BATH FANS *Seal ALL seams on dryer with silver tape *Screw, tape and mastic ALL venthood connections *Need (5) 14x8x10 boots (4- Floor and 1- Ceiling) System placement- 4 Ton Zone (1) Master/Study, (2) Exercise/Bsmt Goes in the Basement Mech Room on the Front Right, 2 Ton Basement Bedrooms Goes in the Basement Mech Room on the Front Left, 2 Ton Basement Sitting/Game/Billards Goes in the Basement Mech Room on the Front Left Zone System- Yes Dampers- 3-12" Bypass- 1-12" Lineset- 1-30'x3/4", 1-75'x3/4"", 1-50'x7/8" B-vent- No *(2) Concentric Vents Waterheater- No *Tankless Floor boots- Yes 14" Flex- Yes Venthood- No Bath fans- 7-4" *Metal Plenums (Bubble Wrap) *Need CONCRETE blocks under both furnaces for better drain slope *Run drains to the hubs in the basement *Need (4) Media Filters (4 Ton Needs 2) *Leave tyton for bath fans *All bath fan flex to hard pipe must have tyton outside of tape *CANNOT RUN MORE THAN 14' FOR 4' FLEX FOR THE BATH FANS *Seal ALL seams on dryer with silver tape *Screw, tape and mastic ALL venthood connections *Need (3) 14x8x10 boots (1- Floor and 2- Ceiling) *Need Aprilaire 100 Pint Dehumidifier for the basement system *Need concrete blocks and drain pan for the dehumidifier *Run 10" Return for dehumidifier to mark in basement and 10" supply to the air handler return plenum
